주요 콘텐츠로 건너뛰기

Eighth generation of the Honda Civic.

59 질문 전체 보기

Bottom front panel is loose

The bottom front panel of my isn't fully attached along the sides (by the wheels), probably due to parking a bit too close to the curb a few too many times. The panels keep popping out along the sides. Any suggestions for how to get them to stay put?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

zlisto , You may have to purchase new plastic push rivet retainers (Link below)or if they are lower ones that cannot be seen, perhaps you can use the medium size pull ties. If the lower valance holes are worn to a larger size and held by bolts or screws insert a larger washer to prevent pull through. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

https://www.amazon.com/Partsam-Fender-Re...

Block Image

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

zlisto 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 18

전체 시간: 627