주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Minimal water damage resulting in display not powering

While camping, my iphone6 was in my pocket and my jeans got slightly wet, nothing at all i was concerned about. Phone was in a case and I removed it and it looked fine so I continued on. Few hours later the Power Button failed to work so I continued using the phone with assistive touch thinking that it was a faulty button. Next day the screen fails to turn on. Siri, home button, speakers all still worked. Later in the day all functionality stopped working. However, when connecting to itunes, it'll remove pictures from my phone and itunes recognizes my phone and asks me to unlock it to continue.

Made an Apple apt today. He ran diagnostics and all was fine, so he then said the motherboard was bad and suggested I replace the phone. I questioned why the phone still connects to itunes, thinking it was a bad display. He agreed. They took it apart to attempt a screen replacement only to return the phone to me telling me that the water damage indicator was tripped so they will not attempt to repair the phone. I'm holding out for the new iphone however would like to resurrect this one.

What to try?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Stick a new screen on that sucker. Your board works if the phone is detected by iTunes. If the water damage was very minimal it is unlikely that it made it all the way to the board. Buy a screen from iFixit and see if it works with a new screen. While it's open, get a q-tip with alcohol and go over the visible parts of the board to clean up any corrosion. If you do see damage on the board (the sticker is not an authority on this) then it may not be worth it since there will likely also be corrosion under the soldered on shields.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

gnu 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 147