기기를 수리하세요 커뮤니티 상점

2012년 부터 13" Retina Display가 장착된 MacBook Pro 모델이 제작되었습니다.

4680 질문 전체 보기

옵션

MacBook shuts off- Only with new battery connected and cover on.

So I had a spill... I know. The good news is the damage was contained to wifi card and keyboard. I swapped out my lower case assembly, but while doing so ripped the battery cover and the next thing you know I was ordering another battery from here. I reassembled everything, got the green light from the charger and the machine booted up, and it worked! But when I put the cover on, the laptop wouldn't turn on anymore and I had no lights from the charger. So I unplugged my battery waited until the capacitors ran out of charge, and it works without the battery connected and the cover off. Currently I'm still endurance testing it.

Things I have checked:

-No visible Water damage

-Fans Working

-Thermal Paste Applied

-Wifi card still broken (gonna buy a usb thing)

I am clueless at this point. Could the battery be faulty? Its the only viable option. School has started once more so I need my laptop asap :'( Please help!

Update (09/13/2017)

Update: The endurance test on the charger has failed, and the system has shut down.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 2개

So it won't run off the battery right? But works off the charger?

의

Correct currently endurance testing on the charger

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

It could be just a bad battery. I'd try a new battery first before going further. If the battery does not solve the issue you have a board level issue.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 4개:

I know, however the battey is new and I do not wanna spend more on a second new battery to test this out? Any suggestions?

의

Are you comfortable using a multimeter? I may have you get some readings off the board, Only if you are comfortable. Also, the place you bought it from should swap it without charge to you.

의

I'm willing to give anything a try! Can you send me the instructions, I will go to the e. engineering lab to use theirs.

의

OK, I will try and give you instructions and pictures the best I can. But first I need your board number. Could you get me your board's 820-xxxx number? It is engraved on the board somewhere. Thanks!

의

댓글 달기

귀하의 답변을 추가하세요

Doga Altinisik 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 49