기기를 수리하세요 커뮤니티 상점

모델 A1138 / 1440x960 스크린 해상도

85 질문 전체 보기

옵션

Replacing The DC Power Board

I need to replace the DC powerboard on my powerbook. The AC adapter won't fit in and I suspect the tip of an adapter has broken off inside.

My question is the take apart guide directs a complete tear down and I'm not sure that's necessary.

I believe it's possible to simply remove the left speaker, PCMCIA cage, and unplug the cable from the DC board to the logic board.

Can I do it this way and avoid doing a complete tear down?

Thanks. MackDog

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

The guide is far from a complete teardown, maybe you looked at the wrong one. Here's the correct one: PowerBook G4 Aluminum 15" 1.67 GHz DC & Sound Card Replacement

I've done a lot of these replacements and followed and written these guides. Every once in a while I find a unnecessary step but not often.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

Thanks again Mayer, I guess I always saw the guide with the nine steps before getting to the DC Sound Card removal.

I want to remove the card so I can open up the back of the round barrel where the AC adapter plugs into as I've found that is the easiest way, for me, to eject broken AC pins.

And if that isn't the problem I have another card I can install.

Either way one more experience, more confidence AND another valuable lesson learned on this incredible site!!

Thanks again to all of you for keeping this site up and going and to Mayer for helping me with this problem!!

I really appreciate your experience and willingness to share your knowledge without ridicule or scorn!!

MackDog

의

The middle bracket of the DC In port will sometimes pull out a quarter to a third of an inch. I use a small pair of hemostats to first dislodge then grasp the broken tip and remove it

의

댓글 달기

귀하의 답변을 추가하세요

N Little 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 5

전체 시간: 1,891