평판: 25
1
1
I dropped my JBL flip 3 speaker the other day and I started to hear a rattle inside so I decided to take it apart and see what it was and it was a small box at the top Corner of the motherboard labeled 1R5 and i don't know how to put it back on
좋은 질문 입니까?
평판: 782.1k
1.1k
893
2.3k
@mtz13 without actually seeing what is going on, it is difficult to answer. Consider posting some picture of your board with your question. Use this guide 기존 질문에 이미지 추가하기 for that. The 1R5 sounds like a fixed 1.5uH inductor. Again without seeing it, this is only an assumption. Those are usually soldered to the board and there is not other way reattach it.
해당 답변은 도움이 되었습니까?
Something similar happened to me. The 1R5 piece didn't break down fully and now one contact is lose. I think the only way is to solder it down. https://imgur.com/a/2y4Xy
해당 답변은 도움이 되었습니까?
I had the same problem and solved it by cutting a wine cork in size to press the 1R5 piece against the contact. Good luck
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 3
전체 시간: 1,483
Exact same problem has happened to me, does anyone have a solution
XxMasked ManxX 의
the same excact thing happened to me
I'm just Kidding 의