Skip to main content

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

594 질문 전체 보기

Phone is overheating after battery is replaces and Water damage

I dropped my phone in water 2 months ago and i got it repaired I replaced the battery and now it is overheating and dying quickly I don't know what is wrong with it because the guy that fixed it said I should have no more problems, anyone know why it could possibly be doing this? Also the Touch ID has stopped working.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

1개의 답변

선택된 해법

Could be a short on the board. Do you know if when it was fixed, they cleaned the board with alcohol, or preferably ran it through an ultrasonic cleaner, with shields removed? If it wasn't cleaned or if the shields weren't removed, there could be corrosion.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

They said they ran it through an ultrasonic cleaner, they said nothing about shields though. If it's corrosion could that make my phone brake and not comeback on? Is there a way to fix corrosion?

의 답변

You definitely want to take the shields off before putting it in the ultrasonic cleaner. Otherwise, it's like taking a bath with your clothes on still. Corrosion can definitely cause those problems, especially when the device has power sent to it.

의 답변

Alright, I will go and ask if they will make sure the logic board and shields are good . Thanks

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Cullin Roberts 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 7

지난 30일: 11

전체 시간: 1,339