주요 콘텐츠로 건너뛰기

Saab/사브가 제조한 차량 수리 안내서 및 지원.

10 질문 전체 보기

Why is the blower fan not working

I have not been able to get the blower to run. I have a 2003 9-3 se convertible turbo.

Unit has climate control , I first started out thinking the basic, replace the resistor. Did not fix the problem. This resistor has power to both side of the wiring. There is a brown and a reds wire. Then the two wire from the fan motor. Then I replace the fan thinking intermediate problem. Still no fixed. I am pointing the climate unit but it seems to be working fine for all that it operates! I am stumped what can I look into, and is there suppose to be power present on both brown and red wires. Help!!!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

any saab techs on this site that can answer a question why is there still power on both sides of the blower fan resistor !!!

댓글 달기

답변 1개

선택된 답변

@srosario post some images of what you are seeing and checking. Not sure what to make out of the power situation you describe and show us where there is power is when you measure. Here is the schematic for Saab 9-3 Heating and vent controls

Block Image

110 = Heater and ventilation controls

  • a=recirculation switch
  • b=heated air window switch
  • c=air conditioning switch
  • d=fan speed selector

111 = Recirculation flap motor

112 = Ventilation fan

23 = Dashboard Integrated Central electronics

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Sam Rosario 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 13

30일 전: 29

전체 시간: 5,511