주요 콘텐츠로 건너뛰기

마더보드 및 CPU 수리 안내서 및 지원.

166 질문 전체 보기

Asrock P67 pro3 has a broken component

Hi Folks,

My friend has came across with his broken PC where I've found a burned out component on the Motherboard Asrock P67 pro3 , but wasn't able to read a top layer with model on it. Can someone give an advice which micro-component should I get for a replacement? Thank you :)

Block Image

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Hi Tarlan Isaev,

If your computer is running slower than usual, randomly freezes or restarts, or refuses to boot, see the Motherboard Has a Faulty Capacitor problem page for capacitor troubleshooting help.

Block Image

are you referring to this? based on the circuit F5, it is a fuse

normally fuse blow can be due to surge or faulty ICs / transistor that draws alot of power and yea....

else the arrow you pointed could be a smd capacitor,

you need to get schematics to know the actual value of the components.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Hi Augustine,

Thank you for getting back :)

I'll have a look to the schematic of it, hopefully it's not so hard to find out :)

Hi Augustine,

Eventually I ordered a wrong fuse. So I decided to solder a tiny wire between two pins and finaly the motherboared has became alive :)

Again thank you very much :)

댓글 달기

귀하의 답변을 추가하세요

Tarlan Isaev 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 497