How to transfer home button to new digitizer

Question

iPad Mini Wi-Fi

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 질문 전체 보기

Perry Green @perrygreen

평판: 147

3

게시일: 2017년 11월 20일

옵션

How to transfer home button to new digitizer

Bought digitizer without tools as i have them already. They do not offer a complete digitizer just by it self or i would have dought it. So instructions do not show how to take my old home button and transfer it to the new digitizer. So could some show me what to pull up so I don’t mess it up. I figured since they sold it the instructions would show this. Thanks a bunch. Perry

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 2개

선택된 답변

Ben @benjamen50

평판: 159.8k

Mtwo Perform

11

191

368

게시일: 2017년 11월 20일

옵션

Chances are you may have bought the wrong part.

Is your iPad mini the first generation one? If yes, the home buttons are usually pre assembled with the screens.

But if your iPad mini is the one with the touch ID then the home button needs to be transferred.

Ipad Mini 2 and newer use the digitizers with no home button pre-installed while the older iPad minis without touch ID use replacement digitizers with home button pre-installed.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

Ipad mini 1 , is the one i have , they dont offer it with the home button, but only in a kit with tools which inalready have. The kit with home buttonis for first time repairs. Would be nice not to have to go somewhere else to buy what i needed. But i will. I looked online and there are other places that have posted how to. Just thought the place where i bought parts would show what they said was “ easy to do “.

Perry Green 의 2017년 11월 21일

just an edit for you ben, the ipad mini 2, is the retina display, but it uses the same digitizer as the ipad mini 1. ipad mini 3 was the first one to use the finger print scanner.

Some cheaper sources do not have the home button or touch controller pre installed, and need to be transferred. most decent quality suppliers will however, sell them with these parts pre-installed, as you stated

Scott 의 2017년 11월 21일

댓글 달기

Ipad mini 1 , is the one i have , they dont offer it with the home button, but only in a kit with tools which inalready have. The kit with home buttonis for first time repairs. Would be nice not to have to go somewhere else to buy what i needed. But i will. I looked online and there are other places that have posted how to. Just thought the place where i bought parts would show what they said was “ easy to do “. — Perry Green
just an edit for you ben, the ipad mini 2, is the retina display, but it uses the same digitizer as the ipad mini 1. ipad mini 3 was the first one to use the finger print scanner.

Some cheaper sources do not have the home button or touch controller pre installed, and need to be transferred. most decent quality suppliers will however, sell them with these parts pre-installed, as you stated — Scott