Phone shows its charging, but won't turn on after screen replacement.

Question

iPhone SE

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1049 질문 전체 보기

Danny Riem @dannyriem

평판: 49

3

2

게시일: 2018년 1월 14일

옵션

Phone shows its charging, but won't turn on after screen replacement.

Hello everybody,

I just replaced the screen of my iPhone SE, after the replacement I turned on the phone and it all worked like it should.

The battery was almost empty and it turned off later. Now it has been sitting in a charger for about 1 hour and it shows its charging, but it won't turn on.

I used a OEM screen for the replacement and I disconnected the battery from the phone before I took the screen out.

Any ideas?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 2개

선택된 답변

Minho @refectio

평판: 221.4k

15

289

807

게시일: 2018년 1월 15일

옵션

The screen shouldn't cause this however, if you still have the original screen, you could try to re-install it just to see if the problem persists. Alternatively, you may have accidentally dislodged a tiny component right next to the battery connector. There are four of them to the right of the connector (when the phone is in an upright orientation). The third one from the top allows communication of the battery state to the CPU. If it is damaged or missing, the phone doesn't know what the condition of the battery and could be causing your problem.

Take a look with a magnifying glass to see.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 1개:

Wel I refitted the old screen and waited about 15 minutes with the phone charging. Then I disconnected the screen and checked every connection. It looked normal.

Then I put on the replacement screen so the phone would not be open overnight and left it in the charger. Next morning it was turned on.

The phone had been in a charger for at least a couple of hours before it turned on. I tried different usb cables. I'm glad it is turned on right now, but I'll be afraid for when the phone goes empty someday haha. Cant be a good thing right?

Danny Riem 의 2018년 1월 15일

댓글 달기

Wel I refitted the old screen and waited about 15 minutes with the phone charging. Then I disconnected the screen and checked every connection. It looked normal.

Then I put on the replacement screen so the phone would not be open overnight and left it in the charger. Next morning it was turned on.

The phone had been in a charger for at least a couple of hours before it turned on. I tried different usb cables. I'm glad it is turned on right now, but I'll be afraid for when the phone goes empty someday haha. Cant be a good thing right? — Danny Riem

skorpi lynn @skorpilynn 평판: 1 · Answer 1 · 2020-01-24T23:00:52-07:00

skorpi lynn @skorpilynn

평판: 1

게시일: 2020년 1월 24일

옵션

I am currently in this same situation . expect i no longer have the original screen . my ex had replaced the original screen with this new one , but that was a while back . I have no idea how to take the screen off & try to fix it . I will try to youtube it .

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

iPhone SE

Phone shows its charging, but won't turn on after screen replacement.

답변 2개

귀하의 답변을 추가하세요