주요 콘텐츠로 건너뛰기

A media center Workstation laptop, released in 2009. It is the third revision of the 17-inch models in Dell’s Studio line and features a processor architecture based on the Intel Montevina platform.

New screen: Power button cable turns latop off.

So I bought a replacement screen for my 1737. After replacing it I went to test, it lit up and started booting! SUCCESS!!!!

But then it turned off immediately.... after trying the usual suspects, just as I was giving up hope, I had a thought.

While it was powered, I reseated the cable to the power button. It started booting..... and turned off again.... strange.

I reseated it again, and unplugged it right after the latop started booting.... SUCCESS, for reals this time!!!!

So, Any advice or common issues with the power button cable or perhaps the button itself sending constant 'presses'???

I would like to be able to turn the laptop on without removing the keyboard and fiddling with the cable, haha.

답변되었습니다! 답변 보기 저도 같은 문제가 있습니다

좋은 질문입니까?

점수 1
댓글 달기

답변 1개

선택된 해법

Hi

Just wondering if you accidentally "pinched" the power button board cable near the hinge area when you reinstalled the display.

Here is a link to the service manual for your laptop.

Here is an image taken from the service manual to show where I mean.

Block Image

(click on image to enlarge for better viewing)

이 답변이 도움이 되었나요?

점수 1

댓글 1개:

I was wondering if this could be the issue. I will check and relieve any pressure on it.

댓글 달기

답변을 추가하세요

Andross Nelson 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 6

전체 시간: 285