6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

575 질문 전체 보기

My screen is black after replacement

I bought a screen for my SE and after i was done replacing and switching the screen the whole screen is black but I can still touch and turn it off manually with slide to power off I just can't see it or anything else on the screen.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

2개의 답변

가장 유용한 답변

if you didnt disconnect the battery when replacing it chances are you have blown the backlight filter

해당 답변은 도움이 되었습니까?

점수 2

댓글:

And if i did what can i do about that

의 답변

you need to take it to someone that does that kind of repair, it could also be a faulty backlight on the lcd, if you still have the old screen and backlight was working on it, then connect it to see if backlight is working

의 답변

Where is the Blacklight located?

의 답변

the backlight is on the lcd, the filter is on the logic board

의 답변

im having the same problem, did you find a soloution in the end?

의 답변

3에 댓글 더 나타내기

의견 추가하세요

When the repair was carried out, did you disconnect the battery. If you did not, it is likely you have fried the device. I would try fitting a new test screen, and if that does not fix the issue then it is a board problem.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

yes the battery was connected

i’ve tried new and old screen and neither work, i can hear the notifactions but just no display

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Dakarai Riverson 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 57