주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

NFC reader not working after replacing battery.

Just noticed that my nfc isnt working when trying to use apple pay. I replaced the battery myself last week so Im assuming I damaged something during the process. What should I start with checking or replacing? Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

선택된 답변

You may have inadvertently damaged or not re-assembled the NFC bracket next to the Screen Bracket. Check out this guide, specifically steps 30-31.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Just opened phone back up and inspected that area, I didnt see any issue with it I definitely hadn't messed with it when I changed the battery. Have you heard of people needing to replace the nfc bracket after a battery change?

댓글 달기

I had replaced my iPhone 6S Plus battery (2750 mAH) with that of 6 Plus (2915 mAH) since both have the same connectors. Battery life did slightly increase but at the expense of the non-functioning NFC/Apple Pay. I think it might have to do with the overclocking of the NFC frequencies out of the acceptable spectrum .

I thought the slightly longer battery life wasn’t worth the lack of NFC so I installed the correct one for iPhone 6S Plus battery (2750 mAH) and NFC/Apple Pay is working well afterwards.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I had the same issue on my iPhone 7. After replacing the old battery for a new one with much more capacity (1800 vs 2100 mAH), the NFC stopped working.

I will try to replace back a 1800 mAH battery again in the future, and let's see if the NFC works well again.

댓글 달기

귀하의 답변을 추가하세요

Chad 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 7

30일 전: 33

전체 시간: 3,606