iPad Mini Screen Digitiser not responding at all after replacement

Question

iPad Mini Wi-Fi

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 질문 전체 보기

Michael Pugh @michaelpugh

평판: 1

게시일: 2018년 2월 15일

옵션

iPad Mini Screen Digitiser not responding at all after replacement

So I decided to replace my IPad Mini Screen because it was cracked and everything went well until my phone lost all charge so I couldn't watch the ifix it video about it, by this time I was already committed and has stuff in the device. I did the screen replacement and accidentally cut the digitiser on the old screen taking it off and not when I try to put the new glass digitiser on it won't respond at all. Please help I'm gonna be in so much trouble because it's not muni iPad it's my friends and I'm trying to fix it for him. I need urgent help!!!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

Minho @refectio

평판: 221.4k

15

289

807

게시일: 2018년 2월 15일

옵션

Cutting the old digitizer flex shouldn't cause any problems, lot's of tech actually do this when removing damaged digitizers (it's faster).

I would go through this guide completely to see if you didn't accidentally damage anything else along the way and correct as needed. Report back with any findings.

해당 답변은 도움이 되었습니까?

예 아니요

점수 4

댓글 2개:

So what i found out was. I stripped some pins off of the touch FPC connector and therefore the touch, home button and lock button wouldn't work. I have attempted to replace it but I only have a 400 degree hot air gun. i dont have anything like a soldering iron. would you be able to help?

Michael Pugh 의 2018년 2월 25일

Replacing an FPC connector can't be done with a hot air gun as it puts out too much air and can damage the surrounding components. A hot air station is needed or a fine point, temperature controlled soldering station.

Depending on where you are located, you may have an experienced micro-solderer locally. If you can't find one locally, then consider mail-in repair. There are several reputable micro-solderers patrolling this forum. You can also click on my profile to learn more about my services, at the very least, it can serve as a data point.

Minho 의 2018년 2월 25일

댓글 달기

So what i found out was. I stripped some pins off of the touch FPC connector and therefore the touch, home button and lock button wouldn't work. I have attempted to replace it but I only have a 400 degree hot air gun. i dont have anything like a soldering iron. would you be able to help? — Michael Pugh
Replacing an FPC connector can't be done with a hot air gun as it puts out too much air and can damage the surrounding components. A hot air station is needed or a fine point, temperature controlled soldering station.

Depending on where you are located, you may have an experienced micro-solderer locally. If you can't find one locally, then consider mail-in repair. There are several reputable micro-solderers patrolling this forum. You can also click on my profile to learn more about my services, at the very least, it can serve as a data point. — Minho

iPad Mini Wi-Fi

iPad Mini Screen Digitiser not responding at all after replacement

답변 1개

귀하의 답변을 추가하세요