주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1169 질문 전체 보기

iPhone feel and have white screen, will not restore!

well i drop the 3g and then a white screen came up.I tried restore many times, i even tried DFU mode.. at the ending of all of than iTunes tells me these two things error 2009, error 1604... oh the Iphone is also jailbroken. help me?????

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 2개

가장 유용한 답변

bob since you already changed the LCD and double checked your connections, take a look at the pictures i have attached. It may be possible that you knocked one of the components loose. Hope you are okay with soldering. At this time I am not sure if there is anything else I could suggest. Of course you can also try this, it worked on a couple of iPod touch's but may be working for your phone as well. Hold the home button then while still holding down the home button hold volume up button then while still holding those buttons go head and hold the power off button and hold that until you see the apple sign. good Luck and hope this helps.

Block Image

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

The white screen, also known as white screen of death, can be caused by a couple of things after a fall. If you're lucky all that happened was that the LCD connector came disconnected and you just need to lift the screen up and securely connect it again. If you're not so lucky it means that your LCD is now not working.

ifixit has a step by step for replacing the LCD. Try following steps 1-4 except when you get to step 4 try pushing that connector back where it belongs instead of unattaching it. Front Panel Assembly Instructions

Good luck! Let me know what happens.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

the connector was connected an i tryed a next lcd on the phone and i am still get the white screen...

댓글 달기

귀하의 답변을 추가하세요

bob 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 3,144