메인 콘텐츠로 스킵하기

Repair guides and support for laptops manufactured by MSI.

104 질문 전체 보기

CPU Heatsink motherboard mount broke off

Hi guys,

I have a medion x7813 (similiar to the MSI GT70) and one of the 3 CPU heatsink mount just broke, this is causing my CPU to run very hot since the contact between the CPU and heatsink is far from good.

Here are some images to show you my problem :

https://imgur.com/a/wPkIG

So how do i fix this ? I was thinking of using epoxy resin or superglue to stick it in place but i don't know if this is the best solution or if it will even work.

Thanks for the help :)

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

Any sort of non conductive adhesive would work, superglue could be an option, being careful not to cover any components. Maybe if you glue it on on the bottom side.

해당 답변은 도움이 되었습니까?

점수 3

댓글:

You think this will work even with the force exerted by the heatsink since the contact zone is pretty small ?

의 답변

The best option would be to buy a new board but given it may be saved by a bit of glue or epoxy, I’d say it would do the job.

It’s the cpu bracket that holds the most tension the heat sink just sits on top and needs to have an even spread of surface area around the cpu, the lack of stand-off means the heat is distributing unevenly, really you could go Linus tech tips and used a cable tie for all the difference it would make, but plz don’t do that.

Let me know if this helps.

의 답변

I went with the epoxy and right now it's working great, thanks for your help mate :)

의 답변

Nice, good job.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Leo Sup 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 2

지난 7일: 14

지난 30일: 80

전체 시간: 857