주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2693 질문 전체 보기

New battery not charging after replacement

Hello,

I replaced the battery on my iPhone 6s and the installation went great, no problems etc etc. When I turned it on it has worked fine, and when I plug the phone in to charge it indicates that it is charging, however the battery isn't actually holding any charge. I have tried charging it without the metal plate that covers the battery socket inside the phone on (as some people have reported this to short the connection) and still no luck.

Are there any other common culprits for the issue, or is it a bad battery? I've tried multiple Lightning cords etc and so it's certainly an issue with the battery/charging mechanism.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 3개

선택된 답변

The easiest thing to try right now is to re-install the original battery to see if that one takes a charge or not. If it does, then you have a defective or damaged battery and you will need to contact your supplier or vendor about a warranty replacement or refund.

If the original battery doesn't charge either, then you may have damaged the logic board.

해당 답변은 도움이 되었습니까?

점수 4

댓글 1개:

Unfortunately discarded the old battery after I installed this one and it turned on (oops). Ordered another and so i'll update when it comes on Wednesday

댓글 달기

The battery can be the primary issue. If another battery doesn't fix the issue, it may be your charging IC on the motherboard.

해당 답변은 도움이 되었습니까?

점수 3
댓글 달기

I would disconnected and re-connected the battery If the issue is still exist try another one, hope it will work

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Did this work out for you? I am facing the same issue.

댓글 달기

귀하의 답변을 추가하세요

Jacob Mullett 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 14

전체 시간: 969