주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

13" 알루미늄 unibody, 2.0 또는 2.4 GHz Core 2 Duo 프로세서.

663 질문 전체 보기

How to connect power button directly to logic board?

Hi everyone!

First of all i'd like to apologize for my bad english. It's not my native language.

So here's the problem:

I have an A1278 unibody macbook with cracked display glass and keyboard, spilled with coffe. Since i got it almost for free (4 beers), i've teared it down and threw it to the far shelf till better times.

Since "better times" came" i decided to make an imac-like desktop machine out of these parts.

And the only problem i faced so far, is that the power button is connected to keyboard. But i need it to be connected directly to logic board.

So i would be gratefull for the keyboard ribbon cable pinout or any suggestions!

Thanks!

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 5

댓글:

Ok. Figured out myself.

You should connect 5 & 6 pins to boot macbook.

Also last two pins immediately shut down power if connected.

Here's the pic: https://lh3.googleusercontent.com/_X_1io...

Please list your solution as an answer and accept it so that your question can be archived to help others.

의견 추가하세요

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

답변 2개

선택된 해법

Ok. Figured out myself. You should connect 5 & 6 pins to boot macbook. Also last two pins immediately shut down power if connected. Here's the pic:

http://goo.gl/9d6ab

해당 답변은 도움이 되었습니까?

점수 7

댓글:

That is very interesting. If I may ask where did you find this information and/or the picture. Thank you

Well, i connected everything together and just tried to connect random pins with a flat screwdriver. It covered 6 pins.

So when i succeed and macbook booted up, all i had to do, was to locate exact 2 pins out of 6. This took me about an hour.

And because there is no information about it anywhere, i decided to make a picture and to share information with others.

For troubleshooting purpose there are often power pads on many Apple logic boards. Most of the times there are two solder pads with a power icon or PWR letters over the pads. Check it out, maybe it's possible to solder two wires to a switch and use the switch to power up the machine.

Yeah, I did searched for this pad, but this macbook seems not to have any.

Not an answer but a question will this work on the macbook pro a1278 as well

1에 댓글 더 나타내기

의견 추가하세요

I found a power pad right above the SATA/Video connectors.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

ukh 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 23

전체 시간: 16,310