주요 콘텐츠로 건너뛰기

모델 A1013, A1052, A1085, 또는 A1107 / 1440x900 스크린 해상도

121 질문 전체 보기

LCD Inverter, Cable, or Screen?

Hi,

Initially, I thought I had a bad logic board until I reset PMU & PRAM, formatted hard drive, and then reinstalled OS 10.5. Boots fine now with no boot/startup issues.

So, my current issue is that I have an screen that has colored vertical lines, a dual image, and a significant black area. Video works flawlessly when connected to an external monitor. Thoughts on whether this could be just an inverter/cable ? Or is it likely the entire lcd ?

See attached pics to see what I'm getting.

http://www.heifetzconsulting.com/images/...

http://www.heifetzconsulting.com/images/...

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

It is not the inverter that only affects the backlight. It could be the LVDS cable or it is not seated properly in the sockets. If the problem gets better or worse by you moving the upper part of the laptop at the hinge it is the LVDS cable, unless you find a bad connection at either end of it. If you haven't found your problem yet then the LCD will need replaced.This guide covers the procedure for LCD replacement. You would use the same guide to replace the LVDS cable. There are several models of your laptop. Please give us the last 3 digits/letters of your serial number and we will locate the correct parts for you.

해당 답변은 도움이 되었습니까?

점수 3

댓글 3개:

I def have the 1.67Ghz Low Res, the A1107

Display data cable/LVDS are here: [연계 제품이 누락 또는 비활성화 됨: IF155-046]

The LCD is here: [연계 제품이 누락 또는 비활성화 됨: IF155-049]

댓글 달기

귀하의 답변을 추가하세요

Clint Wagner 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 2

전체 시간: 2,304