Stuck in Bootloop before and after replacing battery

Question

iPhone 6s Plus

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Michael N @michaeln14086

평판: 33

2

게시일: 2018년 6월 10일

옵션

Stuck in Bootloop before and after replacing battery

With my 6s+ the battery went from 90% to 1% and restarted itself over and over, and then wouldn't charge. I thought the battery was to blame so I replaced it. It worked good for a day and then its back to 1% and restarting. Now, its stuck in a boot loop were it will go between quickly flashing the backlight and flashing apple logo. Any ideas? Ive tried to restore but it doesn't stay on long enough.

Also, when I first opened the phone 6 months after buying it on eBay, the battery connector cover was missing. I read online it could be the battery sensor. Any ideas?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 2개

선택된 답변

Michael T @mthomas12941

평판: 1

3

게시일: 2018년 6월 11일

옵션

Try applying some pressure down on the connector while the phone turns on. If it works fine then you just need the metal bracket. If not then you might be missing some components near the battery connector which are commonly knocked off when preforming a battery replacement.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thanks! Im going to have it replaced sometime this week.

Michael N 의 2018년 6월 17일

댓글 달기

Ben @benjamen50 평판: 159.8k Mtwo Perform 11 191 368 · Answer 1 · 2018-06-10T23:40:16-07:00

가장 유용한 답변

Ben @benjamen50

평판: 159.8k

Mtwo Perform

11

191

368

게시일: 2018년 6월 10일

옵션

I think you need the battery connector cover, the battery ribbon cable plug may have a loose connection to the battery connector on the board requiring that metal cover that goes over the battery connector and charging port connector.

iFixit sells the battery connector bracket here:

iPhone 6s Plus Battery Connector Bracket

Here is a guide in case you need it:

iPhone 6s Plus 배터리 교체