주요 콘텐츠로 건너뛰기

Repair and disassembly guides for GE Microwave ovens.

350 질문 전체 보기

Replacing dead high voltage cap with similar of lower capacitance.

Hi,

The high voltage capacitor for my microwave oven has shorted. It is a 2100v, 86mfd capacitor.

I have a "spare" that is very similar: 2100v .76 mfd (so .76 instead of .86 mfd. Can I use it?

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Without knowing more, I'd say not to use it. That particular rating may be required for the proper operation of the magnetron (the thing that generates the microwaves). GE should be able to get you the right part.

Best of luck.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I had been hoping for an informed reply. It turns out, as I learned since I posted the question, that the high voltage capacitor is part o fhe voltage doubling circuit between the high voltage transformer and the magnetron. If the capacitance is a bit low, it reduces the final voltage - it does not quite "double" - to the magnetron, which results in a small reduction in the power the magnetron delivers, but with zero risk to the circuitry.

댓글 달기

귀하의 답변을 추가하세요

H Stahl 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 10

전체 시간: 147