주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Powering back on by itself after shutdown.

Hi,

I have an iPhone 6 that was draining its battery very quickly. I first changed the battery in hope this would fix the problem, but it still drained very quickly. I then replaced the Tristar IC. This fixed the battery drain issue. Although now when I power off the phone, it stays off for about 5 seconds then powers on by itself. I also notice that when I attach a charged battery, the phone powers on without pressing the power button. I am unsure if this was a problem before changing the tristar IC. No cable plugged in to the phone, power button flex is functioning fine, iPhone 6 running iOS 11.4. Any help would be greatly appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

After removing the charging IC (U1401), reballing and re-soldering back onto the motherboard. Now the phone is working perfectly. The phone no longer reboots after I power it off. I hope this will help anyone else with the same problem. I guess replacing this with a new component would work also.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

Try disconnecting the power button flex to see if the problem persists. A bad flex could be "starting" the phone on it's own.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I've tried that. I've also disconnected the power button flex after sliding to power off. But it still restarts.

댓글 달기

귀하의 답변을 추가하세요

Peter N 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 79