주요 콘텐츠로 건너뛰기

첫 번째 iPhone 모델, Model A1203은 4, 8, 또는 16GB 용량과 알루미늄 뒷면을 가지고 있습니다. 수리를 하려면 상당한 양의 비집기와 납땜을 요구할 수 있습니다.

224 질문 전체 보기

I forgot the passcode to my I pod touch

I found an old I pod touch that I used to use and I cant remember the passcode. After trying for a while, it eventually said "ipod is disabled- connect to iTunes" and now I cant even try unlocking it. So I connected it with my apple computer and itunes said "itunes could not connect to the ipod touch because it is locked with a passcode. You must enter your passcode on the ipod touch before it can be used with iTunes." So I googled what to do about this, and it said to put my device in recovery mode by holding the home and power buttons. This just turned the device completely off then on again, and itunes still didn't work. What should I do?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

The procedure is halfway correct..after the ipod touch screen gets black and before you see the booting logo you have to release power button and keep home button pressed, until it shows the connect to itunes or the screen just stays black. You better do that when the ipod is already connected to the pc or it might restart again. It might take you a few attempts until you get the right timing, but sooner or later you'll get it.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Ants Gimi 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 85