The red light comes on and starts to blink continuously

Question

Panasonic Viera

Repair guides and support for Panasonic's Viera line of televisions.

417 질문 전체 보기

leroy rowe @leroyrowe

평판: 1

1

게시일: 2018년 7월 11일

옵션

The red light comes on and starts to blink continuously

i have a Panasonic TX-L50B6B,when i press the power button the green light comes on but the picture wont come on,after about 5 seconds the green light goes off and the red light comes on and starts to blink continuously

just now by leroy rowe

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 4개

i have a Panasonic TX-L50B6B,when i press the power button the green light comes on but the picture wont come on,after about 5 seconds the green light goes off and the red light comes on and starts to blink continuously

leroy rowe 의 2018년 7월 11일

Is there a pattern to the blinks? For example, 5 blinks a pause, then 5 blinks again etc...

Abrsvc 의 2018년 7월 11일

no,when the green light goes off the red light comes on and blinks continuesly,no gaps.

leroy rowe 의 2018년 7월 11일

I have the same problem. The blinking pattern is 1 blink pause 1 blink pause etc

shaw.flesher 의 2021년 9월 6일

댓글 달기

답변 2개

선택된 답변

oldturkey03 @oldturkey03

평판: 782.8k

1.1k

893

2.3k

게시일: 2018년 7월 11일

옵션

leroy rowe, this “the red light comes on and starts to blink continuously “ is the Panasonic error code 1 = this is a backlight SOS. It most commonly originates from a faulty A-board. First thing to check is the BL-On voltage from your power supply to the A-board (should be around 2VDC to 5VDC) Depending on your Board (there are multiple variations but all are on connector P2) it may be pin 14-13-12. Also, it looks like your TV uses a designated LED driver board, so do check on that well. Post some pictures of your boards so we can see what you see and hopefully can guide you further. Use this guide 기존 질문에 이미지 추가하기 for that.

This is pretty much the same layout as I would expect from your TV. It does show what boards are where and their basic function

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

thanks for your help,do you know how much this would cost to get fixed by somebody.thanks

leroy rowe 의 2018년 7월 11일

leroy rowe that will totally depend on the labor rate in your area and what the actual error is. I'd figure somewhere in the $200-300USD range

oldturkey03 의 2018년 7월 12일

댓글 달기

i have a Panasonic TX-L50B6B,when i press the power button the green light comes on but the picture wont come on,after about 5 seconds the green light goes off and the red light comes on and starts to blink continuously — leroy rowe
Is there a pattern to the blinks? For example, 5 blinks a pause, then 5 blinks again etc... — Abrsvc
no,when the green light goes off the red light comes on and blinks continuesly,no gaps. — leroy rowe
I have the same problem. The blinking pattern is 1 blink pause 1 blink pause etc — shaw.flesher
thanks for your help,do you know how much this would cost to get fixed by somebody.thanks — leroy rowe
leroy rowe that will totally depend on the labor rate in your area and what the actual error is. I'd figure somewhere in the $200-300USD range — oldturkey03

Abrsvc @abrsvc 평판: 4.1k ABR Services 3 2 · Answer 1 · 2018-07-04T18:10:32-07:00

가장 유용한 답변

Abrsvc @abrsvc

평판: 4.1k

ABR Services

3

2

게시일: 2018년 7월 4일

옵션

This problem is most commonly caused by bad capacitors on the power supply board. If you feel comfortable working on this set, remove the back cover and examine the power board. If you see any capacitors that have bulged tops, replace them. Or contact someone that can work on the boards. Once changed, the problem will likely be resolved.

Dan

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

Panasonic Viera

The red light comes on and starts to blink continuously

답변 2개

귀하의 답변을 추가하세요