메인 콘텐츠로 스킵하기

Repair guides and support for LED, LCD, HD and other Vizio TVs.

568 질문 전체 보기

Why have I replaced my power supply board and screen still goes black?

I have a Vizio 550I-B2 LWJ2PPAQ Tv. One day screen went black but had sound. I never could see any semblance of pic with flashlight check. I replaced power supply board - tv booted up and picture went black with sound in 5 minutes. I will attach images of original and new power supply as well as LED driver. One capacitor looks crooked but unsure if that means anything. 16 pin connection looks fine.

Block Image

Block Image

Block Image

Block Image

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Check CN101, CN201 and CN202 with a multimeter. See if you get the voltages that are needed from you board.

의 답변

의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

3개의 답변

가장 유용한 답변

@jlove

Check CN101, CN201 and CN202 with a multimeter. See if you get the voltages that are needed from your board. This "tv booted up and picture went black with sound in 5 minutes." is usually an LED issue, so check/replace your LED driver board (if your power board supplies the right voltageto it (CN201/CN202)). The only thing after that is your main board.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

There can be a number of reasons for a black screen, but the most common is a failure of the back light. This can be a power problem where the LEDs don't get power or even an LED or two being open and thus not lighting. The fact that no picture was seen with a flashlight concerns me a bit. This may indicate that the TV is being told to produce a black screen. If so, than this may be a problem with the logic board (the one under the shield in the pictures.)

Some poking around with a meter is called for here. If you feel comfortable doing this, update this posting and we'll provide more instructions on what to check.

Dan

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Jolee, did you get this fixed? I replaced the power board but still nothing. I can see with a flashlight that the tv is on though?

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Similar answer for you. A single LED can be out or a strip. It can also be a component failure on the LED driver board. Check the voltages as suggested by Oldturkey03 as well.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Jolee Love 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 9

지난 30일: 46

전체 시간: 273