A/V jack messed up- Screen flickers on and off

Question

Nintendo Wii

2006년 11월 북미에서 출시된 Wii는 인터넷 연결을 직접 지원하는 닌텐도 최초의 가정용 콘솔로, 온라인 게임과 Wii 숍 채널을 통해 게임 및 미디어 애플리케이션의 디지털 유통을 모두 지원했습니다.

288 질문 전체 보기

Caleb Wininger @calebwininger

평판: 13

1

게시일: 2011년 4월 22일

옵션

A/V jack messed up- Screen flickers on and off

My wii keeps losing video/audio. It happens intermittently. I've determinded it's something with the A/V jack on the back of the console. When in "jiggle" the cable at the console connector back and forth the audio/video cuts in and out. Sometimes the video stays on but the colors don't appear correct.

is there an easy fix for this? i'm not afraid of tearing it apart and doing a little solder-work. Just don't know where to start or what to look for...

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 1개

WiseGeek @wisegeek 평판: 1.3k 10 2 4 · Answer 1 · 2011-04-22T16:34:03-07:00

가장 유용한 답변

WiseGeek @wisegeek

평판: 1.3k

10

2

4

게시일: 2011년 4월 22일

옵션

The first place to start would be the cable itself, it might have a kink in it therefore causing the bad connection. If you hold it in a certain position does the picture and audio come back? That would probably be the simplest way to fix it, but not permanent. Then move on to the connector itself, does it feel more loose than normal? if so, then its most likely a bad soldier joint. One more thing to consider is the contact pins might be bent out of alignment but thats probably not the case. iFixit sells Wii motherboards, but they're a bit pricy. See if you can find a Wii on Ebay for parts, and unsolder the AV connector form the bad one and put it in yours.

Good luck.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 3개:

i know the cable is fine. holding it in a certain position will solve the problem. it's the jack for sure. it feels a little loose possibly where it attaches to the motherboard. how tricky would it be to fix the bad solder joint (if that's the issue?)

Caleb Wininger 의 2011년 4월 22일

Well, it looks bit tough. However nothing too bad. I count around 15 pins to solder. If you get the right tip, and get really small gauge soldier from radio shack (look for silver soldier) then it wont be that hard.

WiseGeek 의 2011년 4월 22일

If you want to see a pic, Nintendo Wii Motherboard look at the back side lower left.

WiseGeek 의 2011년 4월 22일

댓글 달기

Nintendo Wii

A/V jack messed up- Screen flickers on and off

답변 1개

귀하의 답변을 추가하세요