기기를 수리하세요 커뮤니티 상점

2010년 중반기 모델 A1278 / 2.4 or 2.66 GHz Core 2 Duo 프로세서

795 질문 전체 보기

옵션

No Power to LCD After Liquid Cleaning

I’ve been cleaning a liquid damaged 2010 with 99% isopropyl. It wouldn’t post for ages, but suddenly has started booting fine: works on battery, charges, keyboard and trackpad work, keyboard backlight works, target disk works, Wi-Fi and bluetooth work, etc.

However, there’s no power to the LCD. I’ve cleaned the board connector and cable several more times, but get no joy. Video output works via MDP, but obviously internal LCD would be great.

Any tips on cleaning further? Does the cable look too damaged?

Block Image

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@minacrime

the solder pads on your connector look corroded as well. Since your cable is also corroded, rest assured that the corrosion is in the connector as well. The only proper way of fixing this is by replacing the connector and cable.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

옵션

You’ll need to use solder wick and flux to clean off the solder on the connector pads. Hopefully you can salvage the connector and the logic board pads are still good. Often times the corrosion eats through, then you’ll need to patch the pads and/or run jumpers.

As far as the cable it’ll need replacement.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Jon 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 37