주요 콘텐츠로 건너뛰기

13" 알루미늄 unibody, 2.0 또는 2.4 GHz Core 2 Duo 프로세서.

574 질문 전체 보기

My MacBook Pro 13inch 2011 Back cover Display Housing Popping off

hey guys today I shocked when I cleaning my MacBook Pro 2011 13inch , I find that my Back cover Display Housing Popping off from his place ?!! I never made any repairs on my Mac or on the display ! so how I can fix it pls ?!

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

Your glass may just be coming loose. Here’s how to replace it, you may just need to re-adhere it.Once you have the glass off, take a loo at the frame, these have been know to crack in the lower left hand corner about and inch up from that corner. If this happens it allows the display to flex on opening and closing and allows the glass to pull loose. I use an epoxy to repair this damage

MacBook Unibody Model A1278 Front Display Glass Replacement

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

If I were you I would just replace this so it doesn’t give you fits in the long run. There is an iFixit guide and a new display assembly stocked by iFixit too. You can find the display assembly part under the parts section in the guide I will provide below. Hope this helps.

MacBook Core 2 Duo Unibody Display Replacement

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

xShad0w 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 79