Mavic 2 Zoom - "Ginbal motor overload"

Question

DJI Mavic 2 Zoom

Second generation DJI Mavic drone, Zoom edition. The Mavic 2 Zoom was released in August 2018 with the Mavic 2 Pro. The two drones are identical except for their cameras.

2 질문 전체 보기

Igor Borisov @igorborisov

평판: 13

1

게시일: 2018년 10월 9일

옵션

Mavic 2 Zoom - "Ginbal motor overload"

Hi, after several flights, my new Mavic 2 Zoom start show this message “gimbal motor overload”.

After start the drone, gimbal try to calibrate, but in end, camera fold down (not in horizon position)

In DJI GO 4 missing gimbal menu.

What it can be?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 2개

did you get a fix for this? As my pro 2 is doing this.

kateys 의 2018년 12월 27일

I have the same issue on my Mavic 2 Pro. I have less than 3hrs flight time recorded - no crashes and the drone is still new

Andre 의 2018년 12월 29일

댓글 달기

답변 1개

I have the same issue on my Mavic 2 Pro. I have less than 3hrs flight time recorded - no crashes and the drone is still new — Andre

jayeff @jayeff 평판: 450.8k 11 367 1.4k · Answer 1 · 2018-10-09T06:25:50-07:00

가장 유용한 답변

jayeff @jayeff

평판: 450.8k

11

367

1.4k

게시일: 2018년 10월 9일

옵션

Hi,

Not for the same model drone but this link may be of some interest to you.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

DJI Mavic 2 Zoom

Mavic 2 Zoom - "Ginbal motor overload"

답변 1개

귀하의 답변을 추가하세요