주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Are Touch ID screen flex cables the same on the 6S Plus and 6 Plus?

Hello everyone, so recently I was supposed to replace my friends iPhone 6S Plus screen. Everything went smoothly during testing, but when unplugging the flex cables, I accidentally tore the touch ID screen flex cable. So, the home button will not respond to presses or touch. The home button itself is fine, just the flex that connects to the screen is torn. I was wondering if it was possible to take the metal shield off of an old iPhone 6 Plus screen and use it, or are they not interchangeable? I would imagine they are because besides 3D touch and a spec bump, the phones are basically the same, right?

Thank You!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

The connectors aren’t the same size so no, they are not compatible. the other issue is that while the 6 Plus Link flex is accessible and replaceable, the 6S Plus Link Flex is embedded in the backlight and is not really meant to be user-replaceable.

Some vendors actually sell the backlight with embedded flex but not iFixit. There are some videos online of people changing them so it’ not impossible. I don’t know if it gives a good result or not but it’s worth a shot otherwise the only alternative is to replace the whole screen.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Thank you for the response! I'll probably just order another screen because I personally do not trust myself or believe I have enough experience to even replace it. It would just be easier to get a new screen.

What you can do is order the backlight anyway, then practice with the screen you damaged. If the result is good, then you can do this in the future rather than replace the whole screen.

댓글 달기

귀하의 답변을 추가하세요

SectorGaming 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 14

전체 시간: 270