주요 콘텐츠로 건너뛰기

Repair guides and support for your Sanyo TV.

360 질문 전체 보기

Sanyo dp39d14 turns on, backlight on, sound is heard, no picture

I have unplugged and plugged back in the TV. The tv will turn on , sound from playstation will come through and you can see the backlight of the TV is on. There is no picture though.

I have unplugged the playstation from the TV and unplugged the TV and plugged back in still the same results

Block Image

Block Image

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 1개

선택된 답변

@kristian93

try all the different video sources as well. If that does not make a difference then you most likely have an issue with the main board. Remove the back of your TV and take a look at all the boards and check for obvious damage. Reseat all the cables and try again. Post some images of your boards with your question so that we can see what you see. 기존 질문에 이미지 추가하기 This series had issues with the EEPROM on the main board ( repalcments need to be soldered to the board etc.)

해당 답변은 도움이 되었습니까?

점수 2

댓글 6개:

I do no see any damage to the TV.

What do you mean by reset all cables

The individual cables that connect the board to the rest of the components.

I have unplugged each and plugged back in, the back light is on, still no picture though. I have tried to high input on my remote and straight from the TV. The screen is just a dark blue light

Okay sounds like a board issue, possibly the scaler or the EEPROM. I do not have any schematics for this board and they seem to be scarce if even available. Consider trying a new board or replace the EEPROM if you know how to solder. The EEPROM could be a possibility. Do you have one more board behind the panel bracket?

No the one in the photos is the only panel board

댓글 1개 더보기

댓글 달기

귀하의 답변을 추가하세요

K Williams 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 7

전체 시간: 838