주요 콘텐츠로 건너뛰기

JBL Flip 4 portable speaker. IPX7 waterproof bluetooth dual driver speaker that won the CES Innovation Award 2017.

83 질문 전체 보기

JBL Flip 4 makes no sound

There is no sound from bluetooth, aux and even system sounds do not work. LEDs are blinking, but I hear nothing even when I turn speaker on/off or toggling bluetooth/pairing mode.

Update (11/01/2020)

Hi guys, thank you all a lot for the answers but my speaker now started to work fine by itself somehow.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 5
댓글 달기

답변 4개

가장 유용한 답변
  1. Turn on the JBL Flip 4. Press and hold the power button until it lights up. ...
  2. Wait for the Power Up Sound. The speaker makes a rising electric guitar strum sound when it powers up. ... which you are not hearing… so give it a few seconds after start up.
  3. Press the Volume UP and Play-Pause Buttons Together. ...
  4. Check that your JBL Flip 4 Did Reset. ...
  5. Done! Try reconnecting.

If doesn't work try this

JBL Flip Speaker Replacement

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

I hear no power up sound. And I have JBL Flip 4. Not 1.

댓글 달기

Ummm hello im laye but i have a solution. theres is a small metal box soldered into the pcb in the left side (where the strap is) so you have to open the jbl, remove the left driver, and then put something to hold the small metal box pushed to the pcb to make contact. I know this us a bad explanation of what is going on but if you want more or want to thank me, please dm me in instagram @zisimopoulos_jr

Also here is a video for explaining

https://m.youtube.com/watch?feature=yout...

The video is with a jbl flip 3 but it works with jbl flip 4 too.

Hope ive helped…

해당 답변은 도움이 되었습니까?

점수 1

댓글 6개:

It works ! Thanks a lot Νίκος

no problem bro... i put a soft rubber underneath but it broke in a week so i used a hot glue gun stick and cut it with scissors to be more durable... If you have soldering experience i suggest you resoldering this chip, but if you haven't got any then dont do anything... Its very easy to mess up.

sorry but this is not a helpfull answer because we have non sound at all! as if the speaker was disconnected

You can see the comment i posted a while ago to try fixing it yourself

Hi !

I have the same problem :-(

Did you succeed in fixing it ?

댓글 1개 더보기

댓글 달기

plug in the charger and hold down the power button..wait a second and then you should hear that your phone has connected to it . mess around with the buttons if still not working or disconnect your whole phone from it and then re due it .

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

I had the same issue, I performed the steps to reset it and didn’t work, but then I tried to use Siri and then it worked.

Worth the shot

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Jerry Doobkowsky 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 6

7일 전: 61

30일 전: 199

전체 시간: 29,865