기기를 수리하세요 커뮤니티 상점

Repair guides and support for televisions manufactured by Sony.

748 질문 전체 보기

옵션

Sony FWD-46B2 - two blinks on front, continual blinks on mainboard

Howdy, all,

I inherited a Sony FWD-46B2 monitor from work a few months ago, and am only now getting to work on it. The main issue is plugging it in and powering it on, which makes the screen blink on very briefly (perhaps 1/15th of a second?) before showing two red blinks on the front of the unit.

I’ve already replaced the power supply and mainboard (separately, not together) and with either component, I get the two-blink issue. Additionally, I’ve noticed that the mainboard continuously blinks red until the TV goes into two-blink mode.

Should I go ahead and replace the power supply in conjunction with the mainboard, or is there another component I’m missing?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 1개

I have this same issue, did you figure this out?

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@machojared

@machojared common issue would be a bad power board but since you've already replaced it, you sort of ruled it out. Yes, if you have both boards, it is ok to go ahead and replace them at the same time. Post some images of your boards/layout and interconnect cables with your question. That way we can see what you see. 기존 질문에 이미지 추가하기

Follow the troubleshooting flowsheet for the 2 blinks to narrow it down. So try this first

Power off → LED flashes two times = Error code detection on panel

Block Image

Block Image

Block Image

Block Image

해당 답변은 도움이 되었습니까?

예 아니요
점수 3
댓글 달기

귀하의 답변을 추가하세요

Jared Harris 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 141