Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1438 질문 전체 보기

Apple Hardware Test Failure Code: Help

Hello Everyone,

I was just playing around with my macbook 4,1 and decided to do Apple Hardware Test. Which resulted in

failure code: 4SNS/1/40000001: VG0C-0.070

I did some research and seem to indicate a sensor failure on the logic board. Though I have not had any no problems with this laptop for the last 8months(2nd owner) I was wondering if anyone could shed some more light on this error code and if I should be concerned

Thanks

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 4

댓글:

good job. Thanks for sharing.

의 답변

Thanks for sharing. Its helps me alot

의 답변

A lot of people are paying attention and so do I. thank you for sharing.

<a href="http://happywheels8.com">happy wheels</a>

의 답변

의견 추가하세요
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오

4개의 답변

선택된 해법

Apple doesn't tell the peons what those codes mean. But if you would like to spend about $47.50 they will tell you. Just call 1-800-SOS-APPLE. But my opinion is, "if it ain't broke, don't fix it".

해당 답변은 도움이 되었습니까?

점수 6
의견 추가하세요

You could try running Techtool Pro from Micromat.

I used to be Mac Certified - and I couldn't get error code info ?? !

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

Run the extended version of the Apple Hardware Test. Sometimes you will get an error if you run the quick version, and it may be something of a false positive. Some have found doing an SMC reset 3 or 4X can eliminate the error (note: a work around not a fix). If it is indeed a logic board error it points to a sensor(s) failing, VPOR might be VGC(VPU) related. You'll probably need a new logic board, AFAIK sensors as well as the VGC are soldered to the logic board which pretty much makes them non-DIY repairs, as soldering on logic boards are not for amateurs.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Clean the fans, increase the air flow around the computer. I agree with previous post. he suggested reset of the SMC 3 - 4 times. also try another AHT cdrom. What is the memory setup in your C2D? are the ram chips installed in a pair?

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Jamie 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 11

지난 7일: 22

지난 30일: 58

전체 시간: 2,078