I have a Kenmore 600 Series washer top load no power. I unplugged it and plugged it back in then got an error message E2/F6 then the power went away again. I changed the electric control board on the washer still no power. I checked the outlet with several different things hair dryer and deep freezer they all worked fine but this washing machine won’t. Any suggestions.
좋은 질문 입니까?
평판: 782.4k
1.1k
893
2.3k
@jo1oopsnb for your washer this would be F6E2=COMMUNICATION ERROR UI TO CCU whc\ich means that “Communication between Central Control Unit (CCU) and User Interface (UI) has not been detected.”
The possible causes could be:
Check AC and DC supplies.
Verify continuity in cable between CCU (UI7) and UI (C2).
Use the attached Techsheet and check the wiring diagrams on pages 23–24. Techsheet for diagnostics
You can also run the diagnostics test 1 and 2 and let us know what you find.
해당 답변은 도움이 되었습니까?
Thank you for your help, this helped me fix the washer I had to replace the user interface panel on the washer.
24 시간 전: 1
7일 전: 4
30일 전: 30
전체 시간: 1,605
댓글 1개
@jo1oopsnb what is the complete model number for your washer?
oldturkey03 의