주요 콘텐츠로 건너뛰기

모델명 A1707. 2017년 6월 출시, 이 MacBook Pro는 Kaby Lake 프로세서 최대 2.8 GHz 쿼드코어 Intel Core i7 프로세서와 Turbo Boost 최대 3.8 GHz를 사용합니다.

327 질문 전체 보기

How to replace the cable that connects the display?

So I’ve been looking for a software solution to an issue with garbage colours appearing on my display when it comes back from sleep. A few minutes ago I realized that it actually happens based on the angle the lid is open (pretty much 100% when 90 degrees, it goes away as it is opened more or less from there, garbage colours get mixed in especially against black and grey,) so I expect the problem is a loose or damaged cable connecting the display to the logic board. I’ve ordered the replacement cable (I’m out of Apple Care) but it’s hard to make out from the photos in the teardown exactly where this cable is and how easy it is likely to be to replace. Anyone with any relevant experience or advice? I don’t want to open it up until I have the parts in hand and sort of assume screwdrivers are basically all I’ll need.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

If you are talking about the reel cables inside the folding part of the hinge, they cannot be replaced, you have to replace the whole display assembly.

해당 답변은 도움이 되었습니까?

점수 3

댓글 3개:

Sad but true! This is a design defect and you didn't cause it! It will cost you around $700 USD.

I would pay a visit to an Apple Store and push for a warranty exemption if your warranty has just lapsed. If you're really lucky they won't fight it. If they do push up the food chain be nice but firm.

Yikes, I thought I had an easy out when I saw the display cable on here (MacBook Pro 15" Retina (Late 2016-2019) Display Cable) but now that I've rechecked the description I doubt that it's what I need. I wonder if there is a connector that might be loose and I may be able to pop back into place, either of you think that's worth a shot before I go to see apple? for 700 USD I may just get used to moving the hinge until the distortion goes away...

Edit: I googled around and found other reports of this issue and now know that there is no way to try and reseat anything. I'm going to contact Apple and see what they can do. Thanks to both of you who commented.

That cable that failed is from the LCD panel and the T-CON board. The cable you pointed to connects the T-CON board to the logic board and is not the one that fails

댓글 달기

귀하의 답변을 추가하세요

William Oldford 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 6

30일 전: 24

전체 시간: 2,272