주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

Small part of the screen does not work after screen replacement

Hello,

I have an Iphone 6s, i dropped it and smashed the screen.

I had the screen replaced.

the screen looks great and all but about 25% of the screen is unresponsive, literally like a strip does not work. If you are to count from the left to right their are 4 icons across the screen the strip is the third icon from the left and stretchers vertical across the whole phone.

Is this just an install issue or new screen issues or is my phone more damaged then i thought?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

I would go back to the person who did the repair as the digitizer is damaged.

댓글 달기

답변 1개

선택된 답변

It’s most likely a bad screen. On the iPhone 6S, all of the Touch driver circuitry is embedded in the screen assembly so any Touch related issues are almost certainly screen related. As @danj suggests, bring it back to the shop so they can resolve the issue.

해당 답변은 도움이 되었습니까?

점수 5
댓글 달기

귀하의 답변을 추가하세요

cam 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 3

전체 시간: 53