Touch id not working after replacement

Question

iPhone 6

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Jason Houdek @longnut

평판: 1

게시일: 2019년 1월 2일

옵션

Touch id not working after replacement

So I bought a new phone. I tried to switch my home button over to my new phone from my old phone and found the Touch ID won’t work. I then decided to switch the home buttons back to the original phone they came with and still get an error while trying to activate Touch ID. The home button works fine it just won’t pick up Touch ID. If anyone could give an explanation or solution It would be greatly appreciated. I just got this iPhone and I already ruined it…

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 2개

선택된 답변

Tom Chai @tomchai

평판: 74k

19

111

82

게시일: 2019년 1월 2일

옵션

Home button is permanently paired to the logic board, swapped buttons will not have Touch ID.

Try a forced restart, or a forced iOS reinstall. If Touch ID still don’t work after all this, you’ve torn the cable somehow.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 2개:

I’ve tried the force restart and no response. I’ve tried deleting everything on my iPhone and starting it as new and says it cannot pick up Touch ID. Home button works fine.

Jason Houdek 의 2019년 1월 3일

The deepest level of reinstall iOS is DFU mode. It will try to reset every chip that contains software. Before you try that, make sure the phone is not iCloud locked with someone else's account and the cellular radio works, otherwise the phone won't survive DFU, or after DFU, you can't get through the activation screen.

Tom Chai 의 2019년 1월 3일

댓글 달기

I’ve tried the force restart and no response. I’ve tried deleting everything on my iPhone and starting it as new and says it cannot pick up Touch ID. Home button works fine. — Jason Houdek
The deepest level of reinstall iOS is DFU mode. It will try to reset every chip that contains software. Before you try that, make sure the phone is not iCloud locked with someone else's account and the cellular radio works, otherwise the phone won't survive DFU, or after DFU, you can't get through the activation screen. — Tom Chai

Duane @duane32794 평판: 2.1k i FiX Phones Plymouth 8 25 1 · Answer 1 · 2019-01-03T01:53:04-07:00

Duane @duane32794

평판: 2.1k

i FiX Phones Plymouth

8

25

1

게시일: 2019년 1월 3일

옵션

If you're sure you never damaged the original home button, and it looks all in tact, and cleaned on the connector, and the logic board pins are clean.

Then possibly, the LCD backplate which contains the flex cable for the home button could be damaged. It's worth replacing that. If not, then you'll need someone who is God at micro soldering, to transfer the components over to a new home button, which can be very tricky without damaging the new home button flex.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 1개:

Touch ID worked completely fine until after replacing them, then changing them back. I was ignorant and thought that I could switch the home buttons because it “looked better” but what you’re saying is just buy another phone?

Jason Houdek 의 2019년 1월 3일

댓글 달기

iPhone 6

Touch id not working after replacement

답변 2개

귀하의 답변을 추가하세요