주요 콘텐츠로 건너뛰기

모델 A1418 / Late 2012 / 2.7 & 2.9 GHz Core i5 또는 3.1 GHz Core i7 프로세서

212 질문 전체 보기

Hardware Diagnostic Failure Code 4SNS/1/40000001:YH1R-0.000

What is this sensor? Temperature sensor right?

I’ve been using this iMac on and off a little bit and also reinstalled High Sierra 2-3 times and Mojave once without any issues or freezes.

Also ran a bunch of hardware diagnostics and that error popped up twice out of 10 or so. iStat Menus currently reports proper CPU temps, low to mid 30’s and ~60 under stress.

Several days ago it reported 100-130 though. I’m not complaining if the problem has disappeared … :)

To ensure there aren’t any significant problems caused by sensor failure what can I do that I haven’t already done? Or, is anything even necessary?

Thanks for the help.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

So I went to the Apple Store and it looks like the error was that the Samsung SSD I upgraded the iMac to wasn’t reporting it’s temperature and voltage to the computer because of a minor incompatibility - the computer didn’t know how to read it from the drive. It still works fine though so nothing to worry about.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

Sadly, Apple does not publish this series sensor errors, I wouldn’t discount it!

I would bring the system into an Apple Store to get them to tell you what the error is and then decide if its something you need to worry about.

Some thinks I would look at is making sure your outlet is properly wired and is properly grounded back to the breaker panel and onward to the ground point (rod or water line pipe) and ti electrically active (not corroded up)

I would make sure you have a good surge suppressor or better yet a UPS for your system as well as your peripheral devices as a surge can also come in via the USB or Ethernet cable.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Josh Orenberg 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 5

전체 시간: 140