주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기
질문 마감됨

My iPhone4 doesn t work after lcd replace

Dear guys,

i had this problem: i replaced display and touch screen on my iphone 4 and saw all was good but after some hours i tryed to use charger and i had bad surprise: charger don t recharge battery and if i try to attack it to my computer it don t find it. So i tried to replace the dock connector and no luck, tryed to change cable , charger and battery and again no luck :(. So in your opinion what is the problem? what happened?

Best regards

Dan

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 1개:

Does the home button work?

댓글 달기

답변 3개

Most Likely you did something wrong when you replaced your display, did you mess with anything else BUT the screen when you replaced the display ? Try backtracking on what you did and reassemble your phone and try it again, you never know it you dont try.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

i tryed many time to reassemble it but no luck, i tryed also to use a recharger not apple and show the message "this charger it s no original" but not recharge too :(. Don t know what to do now.....

댓글 달기

My experience says it can be the kabel of the charging port

it is fragile

해당 답변은 도움이 되었습니까?

점수 0

댓글 4개:

i tryed to change the charging port connector but no luck

That one [연계 제품이 누락 또는 비활성화 됨: IF182-009]

yes that one

i change display and all partsin my job and today the same problems. i changed display and touch screen on iphone 4 and after to have plugged and unplagged display into his socket in logic board the same problem. all the phone work right but it s impossible recharge it. Do exist a block that close the charge if some1 replace display many time or i m just unlucky?

댓글 달기

did you make the connector the battery plugs into loose ?

http://www.iphonecentral.us/iphone-repai...

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 5,036