How to replace WIFI antena? Paste it? what about cables?

Question

iPhone 1st Generation

첫 번째 iPhone 모델, Model A1203은 4, 8, 또는 16GB 용량과 알루미늄 뒷면을 가지고 있습니다. 수리를 하려면 상당한 양의 비집기와 납땜을 요구할 수 있습니다.

224 질문 전체 보기

Shai @shai48886

평판: 265

6

18

게시일: 2011년 6월 11일

옵션

How to replace WIFI antena? Paste it? what about cables?

Hi,

In this picture its the iPhone 2g without the LCD:

http://img217.imageshack.us/img217/1135/...

Which of the white cable(1, 2 or 3 in the pic) is responsible for the WIFI signal?

How can I know if the problem is the cable, or the whole ANTENNA Module (the red square in picture)?

the phone/network carrier signal is OK, its just the WIFI which bad.

And if I buy this Antenna module:

http://img861.imageshack.us/img861/817/4...

How the I replace it?

I should paste it?

Is it difficult to install it?

thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

선택된 답변

Richdave @richdave

평판: 32k

103

61

76

게시일: 2011년 6월 13일

옵션

The white cable is an assembly of 2 cables with total 4 connectors - you need to replace as an assembly if you think it is faulty

See HERE and zoom the picture

This GUIDE should assist in replacing the Antenna module - specifically from step 21.

The module is likely held in with double sided tape. Something like THIS may be suitable for re installation.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 3개:

Wow.. Thanks for nice answer:)

I have a friend that his WIFI doesn't work.

So I thought to open his iPhone, and try 3 things. Please tell me what you think:#see if the white antenna cable connected in their places. #replacing the Antenna module with Antenna module from an old iPhone. #buying a new Antenna module or white Antenna cables if nothing will work.

====

Another questions:=*Where is the Antenna that makes the calling signal? I mean the 3G and not the WIFI? I want to know the risk of "playing" with Antenna module part.. if I can make more damage that it was before?

Thanks

Shai 의 2011년 6월 13일

By the way - i found out, that the wifi cable is only one of the cables that attached to the Antenna module, what makes me think that it is a big risky to replace the ANTENNA module because I can loos the ability to make calls - 2g/3g/gprs signal. here u see where the wifi is in the buttom,:

http://img191.imageshack.us/img191/5317/...

Shai 의 2011년 6월 14일

Shai if I remember correctly the cables are pop on/ off no glue required. Like iPhone 3G connector for wifi or 3GS connector 7.... So be careful and you'll be fine. The glue is a low temp silica type that they put on at manufacture/assembly to keep everything in place. You don't really need to replace it

pollytintop 의 2011년 6월 14일

댓글 달기

Wow.. Thanks for nice answer:)

I have a friend that his WIFI doesn't work.

So I thought to open his iPhone, and try 3 things. Please tell me what you think:#see if the white antenna cable connected in their places. #replacing the Antenna module with Antenna module from an old iPhone. #buying a new Antenna module or white Antenna cables if nothing will work.

====

Another questions:=*Where is the Antenna that makes the calling signal? I mean the 3G and not the WIFI? I want to know the risk of "playing" with Antenna module part.. if I can make more damage that it was before?

Thanks — Shai
By the way - i found out, that the wifi cable is only one of the cables that attached to the Antenna module, what makes me think that it is a big risky to replace the ANTENNA module because I can loos the ability to make calls - 2g/3g/gprs signal. here u see where the wifi is in the buttom,:

http://img191.imageshack.us/img191/5317/... — Shai
Shai if I remember correctly the cables are pop on/ off no glue required. Like iPhone 3G connector for wifi or 3GS connector 7.... So be careful and you'll be fine. The glue is a low temp silica type that they put on at manufacture/assembly to keep everything in place. You don't really need to replace it — pollytintop

iPhone 1st Generation

How to replace WIFI antena? Paste it? what about cables?

답변 1개

귀하의 답변을 추가하세요