기기를 수리하세요 커뮤니티 상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2693 질문 전체 보기

옵션

iPhone 7 batter inside a iPhone 6s

Currently my phones battery health is only at 82% and it isnt getting me through the day, so I was wondering if I could take a Iphone 7 battery and transfer it into my 6s. In my head it looks like it would work, considering the connectors are the same and all I would have to do is bend the flex cable a little bit/seat the battery differently to make it fit nicely. I have looked around but cannot find any solid answers for my question besides amazon/ebay/ifixit telling me “This battery is only compatible with the iphone 7”

Is it possible?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

As you say, the connector is the same but the flex length is different. You may be able to bend it in place but be careful not to kink the flex. I mix and match batteries all the time for testing purposes but not when sealing a device

The iPhone 7 battery is smaller in length and width than the iPhone 6S battery and by quite a margin however it is thicker so it’s unclear if this will fit “properly” inside an iPhone 6S due to vertical clearance. If it does fit, you will get a nice boost in design capacity (1960 mAh vs 1710mAh).

So my suggestion is to try it and then post back so others will know from your first hand experience :>).

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Will check back when I've done it myself

의

댓글 달기

귀하의 답변을 추가하세요

Caliber 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 4

전체 시간: 72