주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Display intermittently fades or turns to black

After the screen was replaced successfully, the phone after about two weeks of functioning properly, will intermittently fade or go black, but the backlight still is turned on and the phone has power. The only way to get the display to come back online is with a soft reset holding the home button and power button until the apple logo appears. No LDI s are tripped inside the phone, appears to be in a very pristine condition. Any thoughts besides the display? This was the original issue happening with the display when I replaced it.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

My initial suspicion would be the display itself. However, if you are having the exact same problem on two different displays, then that reduces the likelihood significantly.

You may have an issue with the LCD driver circuit but the only way to really troubleshoot this moving forward is with known good parts and then proper board level troubleshooting if necessary.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

This is pretty much what I was starting to think as well besides any possible environmental factors that could somehow be causing the issue.

댓글 달기

귀하의 답변을 추가하세요

Matthew Clark 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 12

전체 시간: 1,573