Skip to main content

Repair guides and support for Ematic tablets.

106 질문 전체 보기

My ematic tablet is not working

Hi. I bought this tablet a few days ago and it stays stuck on the screen logo. Now when I turned it off again and pressed the power button and the volume buttons it took me to the recovery screen but I also get the Android man laying down saying no command(separately). When I went back to the recovery screen I tapped the recovery system to reboot and I pressed the power button. It went off and came back on but it is still stuck on logo screen. I really like this tablet so please help or any suggestions. Thank you

Answered! View the answer I have this problem too

Is this a good question?

점수 0
코멘트 추가

안드로이드 수리 키트

새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

지금 장보기

안드로이드 수리 키트

새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

지금 장보기

1개의 답변

선택된 솔루션

Hi,

What is the model number of the tablet?

Have you tried pressing the reset button for about 5-10 seconds, to see if this resets the tablet back to normal?

It is found on the back of a lot of Ematic android tablets

You will need a pin or opened paperclip to operate the button as it is recessed in a hole in the back cover.

Do not confuse the hole with the microphone inlet hole. You may damage the microphone if you shove a pin in there.

Check the tablet’s layout description in the User Guide that should have come with the tablet to help verify the reset button’s location, (if it has one that is).

Was this answer helpful?

점수 1
코멘트 추가

Add your answer

Karyn Moore will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 37