메인 콘텐츠로 스킵하기

2008년 10월 출시 / 2.4, 2.53, 2.66, 2.8 또는 2.93 GHz Core 2 Duo 프로세서

457 질문 전체 보기

Starts up with fans on high and no backlight-help please

I have a MacBook Pro 15" Unibody Late 2008 and Early 2009 with a dead hard drive and no battery.

It starts up fine with an Apple OS disc but the fans are on high and the backlight is out. I can barely see the Apple logo in the middle of the screen and hear the cd chiming away.

Any ideas? No damage physically to the Macbook. First thing I did was reset the SMC which got it turning on. Took me a few tries to get it to turn on, than I zapped the pram, now the above is my problem. I did remove the back cover and the motherboard looks good.

I’m stumped, especially since the fans keep going on high.

Thanks.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

2개의 답변

가장 유용한 답변

Hook it up to an external monitor to narrow down your diagnostic search.

MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Assembly Replacement

해당 답변은 도움이 되었습니까?

점수 3

댓글:

Thanks Mayer, I have been looking for the adapter, I know I have one but where it is in my Mac junk is another thing.

의 답변

Boy, do I understand that ;-)

의 답변

Found my adapter and actually found a VGA lcd monitor. I am at the desktop its running ok with these exceptions:

• Obviously fan still on high speed, ordered a battery, I assume that will take care of that problem

• Hard to startup, only starts with some sort of SMC procedure, either that or holding power button and plugging in the power adapter. Is that an issue from the missing main battery as well?

• Main LCD panel still has no backlight, is that an issue with the GPU or the backlight fuse on the motherboard?

Thanks

의 답변

So you do get a screen on the external?

의 답변

Yes, screen and mouse.

의 답변

5에 댓글 더 나타내기

의견 추가하세요

The system is designed to have a battery installed.

Within the battery pack is a thermal sensor which is part of SMC services if its not getting its signal the system goes into fail-safe mode pushing the fan to the max as it assumes the system needs to be cooled.

Lets install this app TG Pro you’ll need to get the older version that works with the Mac OS-X you are using on your drive. Post an email to Matt asking for it, tell him you are having a problem and the folks here on IFIXIT recommended using it (support@tunabelly.com). It will allow you to see the thermal sensors and the fans within your system. Take a snapshot of the main window so we can see all of the sensors maybe we can spot whats not working properly here if it’s not the missing battery.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Thanks Dan. Guess Im off to find a battery.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Jeff 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 61