주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Stuck at "Press Home to upgrade" with broken home button

I just recently factory reset my old iPhone 5S to iOS 11.x (don’t know the exact version), and after doing so I tried to restore my old apps. But after doing so, my phone rebooted and got stuck with the message “Press Home to upgrade”, sadly my home button isn’t functioning so can’t get past it. I also had AssistiveTouch on, so I could use it to proceed but the button just isn’t responding.

Also literally nothing happens when I connect my phone with an USB cord, it worked fine 5 minutes ago but after this white screen, nothing happens. The phone boots up when I insert the cable in an offline state.

I am really close to just throwing against the wall because I fear that there is literally nothing left to do.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

가장 유용한 답변

Just grab a different button and plug it in. The phone isn’t connecting to usb because of the annoying “usb restriction'“ that is enabled by default. The phone will refuse to make a data connection (to a computer) until you enter the passcode, and to do that you need the home button.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Sadly I don’t have a random button laying around the house.

댓글 달기

Your only option is buying a new home button.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Kevin Kenk 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 11

전체 시간: 107