주요 콘텐츠로 건너뛰기

모델 A1013, A1052, A1085, 또는 A1107 / 1440x900 스크린 해상도

121 질문 전체 보기

thick white line on the left side of the screen

A PowerBook came to me with a thick white line on the left side of the screen. It shows all the time, I have run ASD to test the whole components and everything is ok. If I connect an external Monitor it's ok too. Could be the LCD or a bad data display cable? Or LogicBoard? How to test it to prevent to buy a part and then to see that the problem persists. Sorry for my english

See the pictures please

http://www.skymac.com.ar/pw/IMG_0306.JPG

http://www.skymac.com.ar/pw/IMG_0307.JPG

http://www.skymac.com.ar/pw/IMG_0308.JPG

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

It's the screen itself. A bad video cable does not consistently only affect a certain portion of the screen.

해당 답변은 도움이 되었습니까?

점수 5

댓글 2개:

When I press the F1 key to darken the screen completely, the whole panel go dark.

One thing that I've not mention is that the white band make a little flicker

Do you think is the LCD?

Thank you very much

Hi! Yes, it still sounds like the screen. However, I'd still try opening an closing it slowly to see if the problem goes away at a certain angle. Before you buy the screen I'd open up the screen hinge and make sure the cables are not being crimped (try powering on with the hinge open, and the cables stretched out). It couldn't hurt to re-seat the video cable on the back of the screen, and on the side of the logic board as well. While these tests are mostly unnecessary, a new 17" screen is expensive, and so they may be useful as far as removing any doubt that it is the screen itself...there's a 99.9% chance that you just need a new screen.

댓글 달기

귀하의 답변을 추가하세요

Flavio 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 1,527