주요 콘텐츠로 건너뛰기

2017년 9월 22일 출시. Model A1863, A1905. GSM 또는 CDMA / 64 또는 256 GB / 금색, 은색 및 스페이스 그레이.

873 질문 전체 보기

Water stuck in camera module

My mom recently broke her iphone 8 and decided to get a new one and I fixed the 8 and am now using it as my main driver. The phone had severe water damage and I have since replaced the screen, but water still remains within the actual camera lense on the rear part of the phone. I have taken the camera out and tried drying it with a hair dryer, but the water remains. Is there any way to fix it? Or to buy a new camera?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

If the glass lens visually looks clean on both the camera and the glass on the iPhone then the rear camera will need to be replaced.

You could try blowing some hot air on the rear camera with a hair dryer for a few seconds and see if that helps.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

If trying the dry the component with the hair dryer didn’t work then it may mean you just need to replace the rear facing camera module. You could try using some isopropyl alcohol (at least 91%) to see if that will displace the water then use the hair dryer again to evaporate the alcohol.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Riley Muir 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 12

전체 시간: 932