기기를 수리하세요 커뮤니티 상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

옵션

itunes error 4014 and replaced NAND already

iPhone came in with error 4014. Tried several computers and cables restoring first. Measured the voltages according to schematics and they all had value. I reballed the NAND and it gave me the same error. Checked the pads underneath and non were missing/damaged.

Placed another NAND from an icloud board and still the same error. I searched online and some say it could be BBPMU which I also replaced. I am running out of ideas. Could I have been unlucky and placed an faulty NAND

This is my first attempt fixed error 4014. Maybe I missed something?? Any tips what I could check before sending it to China for a boardswap?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

You have to reprogram the NAND before installing it on your device. Also check your main NAND lines (PP0V9 and PP3V0) as well as PP1V8. If you remove the NAND again, check the pads in diode mode. Anything connected to the CPU should give you some kind of “normal” readings - check XW for expected readings.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 6개:

The 3 lines all have the correct voltage. I thought I could just restore the iphone. Itunes recognizes the iphone in dfu mode. The NAND is wiped

의

The NAND has to be programmed via a special programmer, such as this one: JC Pro 1000S / P7

의

Oh I have this machine but the original NAND cannot be read. Thats why I wiped the new one. It doesn't work if I use a empty NAND and itunes to restore it?

I get a 4014 error when I try restoring with the empty NAND which suggests NAND problems. Is this because it's empty or is there something else causing this error.

의

If you could not read the original nand you will have to manually input the IMEI number and Mac Address into your programmer and write it to the new nand.

의

Late update, I took the info of an spare NAND I had and wrote its info on the wiped NAND. So I guess a nand cannot be empty when you restore??

Itunes restored the NAND without problems. It could not be activated because the serial and wifi address didn't match.I wrote the original serial and wifi address back and it asked me for the icloud info which I m waiting on so it should work now

의

댓글 1개 더보기

댓글 달기
가장 유용한 답변

옵션

Have you tried another charging IC (tristar)? Sometimes these can cause weird problems with restores on iPhones as that chip is responsible for USB communication and not just charging.

If not, you may want to replace the charging chip (try another charging port assembly first before doing so in case of a bad charging port).

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

It was the empty NAND that gave the error.

의

댓글 달기

귀하의 답변을 추가하세요

KWH 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 6

전체 시간: 4,101