ํํ: 25
1
1
I was removing the back glass panel of my iPhone Xs Max using a heat gun to loosen the adhesive. I must have either used too high of a setting or heated too long. The front panel now shows a โgold" patch in the upper right corner. You can still see all the pixels in that area through the patch. I've attached photos to show. Would I have to replace the whole panel or could I clean this somehow?
์ข์ ์ง๋ฌธ์ ๋๊น?
ํํ: 817.6k
1.2k
924
2.4k
@thejunhorde to much heat from the heat gun is the cause for this. You need to replace the display to fix this. iPhone XS Max Screen/์คํฌ๋ฆฐ ๊ต์ฒด
์ด ๋ต๋ณ์ด ๋์์ด ๋์๋์?
ํํ: 13
2
I have the exact same issue, happened in the exact same manner. Unfortunately the answer to this problem as far as people have told me is to replace the screen. Since in my case under the patch I can see clearly that colors are displayed well. And by this I mean the Green battery logo is still green I am thinking maybe we have burned the top glue and that is what is causing the weird colors. I am thinking about trying a top glass replacement ( not me obviously because I donโt have the right tools ) and see after as I donโt want to replace the screen because I will loose true tone and also refurbished original OLED is quite expensive. Please post here your resolution because I am interested in this topic
์ด ๋ต๋ณ์ด ๋์์ด ๋์๋์?
You won't loose true tone if done properly
์ง๋ 24์๊ฐ: 1
์ง๋ 7์ผ: 10
์ง๋ 30์ผ: 25
์ ์ฒด ์๊ฐ: 3,579
๋๊ธ 1๊ฐ
Lol u have a burn mark on ur screen because u burnt it, lol
Leave it alone for a little while and see if it fades if it doesn't or it gets worse then u would need to replace the screen.
c9679 ์